Zirconia Orodent Thor 1200 MPa

100% Tosoh powders
We use exclusively certified TOSOH powders because they guarantee the highest purity and the best manufacturing standards in terms of eco-friendliness, strength and aesthetics.

All-in-one-solution
Orodent Thor 1200 MPa multilayer disc offers the highest flexural strength and an excellent natural aesthetics: it allows to make every kind of structure, from single crowns to full arch frameworks and restorations with gingival parts.

Simplicity of use
Orodent zirconia is pre-sintered at a low temperature in order to provide an easy-to-process material that wears tools down to a minimum, thus extending tools’ life.

Natural Aesthetics
Its 45% translucency guarantees an excellent aesthetic result in all shades.

Highest Safety
The flexural strength of Orodent Thor is 1200 MPa across the whole height of the disc, ensuring maximum safety for any type of restoration.

Full range of thicknesses and colours
Orodent Thor 1200 MPa is available in 14 colours and 7 thicknesses. Orodent Colorodent Gold and SuperColori lines also allow the infiltration and characterisation of all types of multilayer zirconia before sintering. Orodent Colorodent Gold and SuperColori lines also allow the infiltration and characterisation of all types of multilayer zirconia before sintering.

Orodent Thor 1200 MPa is designed and made with 4 layers of colour and a single flexural strength of 1200 MPa from the neck to the enamel (cusp).

Orodent Thor 1200 MPa is the ideal solution for all types of restorations. Based on your needs, you can choose a monolithic solution, cut-back technique or microstratification.

• Single crowns
• Three-unit bridges
• Full bridges up to 12 units and Toronto bridges (max 2 pontics)

All Orodent discs, manufactured entirely in Castelnuovo del Garda, are pre-sintered at a low temperature for better workability.

Pre-sintering in this way allows to have the material in the chalky state (not vitrified) offering important advantages:

• good workability with the possibility of finishing the prosthesis with hand tools before sintering
• longer tools’ life (up to 700 elements with a bur for roughing)
• the extended time in the furnace ensures the homogeneity of the pre-sintering heat treatment, which makes it possible to obtain a good hold on the thinnest parts

Sintering is the key step in the entire process. It is during this step that zirconia acquires all its properties of translucency and flexural strength.

Orodent has developed 4 sintering programmes that must be chosen according to the thickness of the prosthesis, not on the type of zirconia: in particular, the heat treatment must guarantee homogeneous heating between the inner and outer layers of the prosthesis to obtain a uniform and three-dimensional shrinkage, paying particular attention to prostheses with elements of different thicknesses.