Zirconia Orodent Venus 850 MPa

100% Tosoh Powders
We Use Exclusively Certified Tosoh Powders Because They Guarantee the Highest Purity and The Best Manufacturing Standards in Terms of Eco-Friendliness, Strength and Aesthetics.

Highest Aesthetics
Orodent Venus 850 M Pa, Thanks to Its Excellent Aesthetic Features and High Translucency (49%), Is Perfectly Suitable for The Front Part; Nevertheless, Its Flexural Strength of 850 M Pa Allows Its Use for Reduced Bridges, Too.

Simplicity of Use
Orodent Zirconia Is Pre-Sintered at A Low Temperature in Order to Provide an Easy-To-Process Material that Wears Tools Down to A Minimum, Thus Extending Tools’ Life.

Natural Aesthetics
Its 49% Translucency Guarantees an Excellent Aesthetic Result in All Shades.

Full Range of Thicknesses and Colours
Orodent Venus 850 M Pa Is Available in 3 Colours and 3 Thicknesses. Orodent Colorodent Gold and SuperColori lines also allow the infiltration and characterisation of all types of multilayer zirconia before sintering.

Orodent Venus is designed and made with 4 colour layers and a single flexural strength of 850 MPa, from the neck to the enamel.

It is the ideal material for restorations which accurately reproduce the colour and features of natural teeth.

Orodent Venus 850 MPa is the ideal material for making highly aesthetic restorations. Depending on your needs, you can choose between a monolithic solution, cut-back technique or micro-stratification.

• Single crowns
• Reduced bridges up to 6 units (max 1 pontic)
• Inlays

All Orodent discs, manufactured entirely in Castelnuovo del Garda, are pre-sintered at a low temperature for better workability.

Pre-sintering in this way allows to have the material in the chalky state (not vitrified) offering important advantages:

• – good workability with the possibility of finishing the prosthesis with hand tools before sintering
• longer tools’ life (up to 700 elements with a bur for roughing)
• the extended time in the furnace ensures the homogeneity of the pre-sintering heat treatment, which makes it possible to obtain a good hold on the thinnest parts

Sintering is the key step in the entire process. It is during this step that zirconia acquires all its properties of translucency and flexural strength.

Orodent has developed 4 sintering programs that must be chosen according to the thicknesses of the prosthesis: in particular, the heat treatment must ensure homogeneous heating between the inner and outer layers of the prosthesis to achieve homogeneous and three-dimensional shrinkage, paying special attention to prostheses that have elements of different thicknesses.